All the posts for press
Posts by Topic
- Die Casting simulation (35)
- Co-design (26)
- Cost reduction (22)
- die casting finishing (18)
- high pressure die casting (16)
- Defects reduction (15)
- VAVE (13)
- die casting process (12)
- Zinc (10)
- casting process (10)
- die casting engineering (10)
- optimization (10)
- die casting (9)
- Innovation (8)
- automotive (7)
- casting (7)
- quality (6)
- Mould Design (5)
- Scrap reduction (5)
- ZAMAK (5)
- Zinc benefits (5)
- product design (5)
- saving (5)
- Mold (4)
- automation (4)
- die casting machines (4)
- hot chamber die casting (4)
- supply chain (4)
- zinc alloys (4)
- Commodity (3)
- benefits (3)
- coffee market (3)
- industry (3)
- mold maintenance (3)
- process improvement (3)
- technology (3)
- thin wall thickness (3)
- Shrinkage porosity (2)
- costs saving (2)
- customer service (2)
- cycle time (2)
- improvement (2)
- metrology (2)
- mold design (2)
- process analysis (2)
- production (2)
- production process (2)
- small appliances (2)
- white goods (2)
- zinc life cycle (2)
- DFM (1)
- Electromechanical systems (1)
- HPDC (1)
- Lighting components (1)
- Press (1)
- SME (1)
- Textile (1)
- Textile Machineries (1)
- Zinc alloy actuators (1)
- actuators (1)
- chrome plating (1)
- electronic products (1)
- industrial machinery (1)
- industrialization (1)
- lead time (1)
- machines (1)
- painting (1)
- quality control (1)
- recycling (1)
- surface treatment (1)
- tier 2 automotive supplier (1)
- vacuum valve (1)
- zinc alloys for doors and windows (1)
There are rules that need to be considered to design products or components in pressure die casting. The application of these advices will lead to a design that is logical, efficient and cost saving. In this article we will list some critical points to be taken into account when designing pressure die casting components.
by Martina Fagnani
December 12, 2016