Zamak components for textile machineries

by Vera Agostini June 29, 2020

Zamak components for textile machineries

In this post we analyze proprieties and applications of Zamak components for textile machineries. The textile sector is indeed an interesting sector considering the continuous technological research which makes indispensable the use of high-performance components capable of responding to high technical and production requirements.

by Vera Agostini June 29, 2020

Industrialization and zinc die casting: phases and processes

by Vera Agostini January 13, 2020

Industrialization and zinc die casting: phases and processes

Industrialization of the product is a very delicate phase in the process of production of zinc alloy die casts: in fact it is in this phase that, after receiving the order from the customer, all the procedures that are necessary to start mass production are defined.

by Vera Agostini January 13, 2020

Thin wall thickness: a competitive advantage in zinc die casting

by Arianna Piersigilli May 23, 2019

Thin wall thickness: a competitive advantage in zinc die casting


Zinc alloys are a material that, if employed in die casting, allows the achievement of products with thin wall thickness. This property of zinc alloys results in an important added value because it permits the production of components with reduced weight and dimensions, thus benefiting from cost and raw material saving.

by Arianna Piersigilli May 23, 2019

The best zinc alloys for hot chamber die casting

by Arianna Piersigilli April 4, 2019

The best zinc alloys for hot chamber die casting


Thanks to their excellent mechanical and physical properties zinc alloys are a perfect material for die casting: they are indeed resistant, fluid, durable and rigid. But which are the best zinc alloys for hot chamber die casting? In this post we are going to analyze the different characteristics of zinc alloys for hot chamber die casting in order to define the best choice on the basis of the features that the final product requires.

by Arianna Piersigilli April 4, 2019